Filters Fast® PH21140 Replacement Refrigerator Water Filter

You' ll never buy another bottled water once you have the GE XWF Refrigerator Water Filter Replacement by Filters Fast®. This activated carbon-activated filter absorbs chemicals, leaving your water pure, refreshing, and odor-free. It reduces the smell and taste of chlorine without reducing beneficial fluoride. Just replace your XWF compatible filter every 6 months to maintain optimal performance and water quality. No need to make a trip to the store for overpriced filters or bottled water!

The PH21140 is a Filters Fast® brand product that is certified for NSF Standard 42, which verifies that the product is made from safe and durable materials with claims backed by test data.

Note: The Filters Fast® PH21140 replaces the GE XWF. If your refrigerator requires the GE XWFE (includes an electronic chip), the Filters Fast® PH21140 will not serve as a replacement.

How do you install the GE XWF Replacement by Filters Fast®?

If you're replacing an old filter in a bottom freezer refrigerator...

1. First, lay a towel beneath the filter cartridge housing to absorb any dripping water.
2. The, squeeze the two front tabs on the filter cartridge housing and gently pull downward to open.
3. Now, tilt the filter down to a 45 degree angle. slowly turn the filter to the left, about a one-fourth turn, until the filter releases itself.
4. Now install the new GE XWF Replacement by Filters Fast® filter by lining up the ports on the filter with the ports on the filter cartridge. Gently insert the filter.
5. Turn the filter to the right until it stops. When it's in the right spot, the arrows will lineup.
6. Slowly push the filter up into the clips and close the filter cartridge housing, pushing the lid up until the tabs lock into place.
7. Dispense about 2 gallons of water, which runs about 5 minutes.

If you're replacing an old filter in a side-by-side refrigerator...

1. First, lay a towel beneath the filter cartridge housing to absorb any dripping water.
2. Then, simply remove the old filter by turning it to the left until it releases itself.
3. Install the new GE XWF Replacement by Filters Fast® filter by lining up the arrow on the filter with the arrow on the cartridge.
4. Gently push the top of the new filter up inside the holder.
5. Turn the filter to the right until it stops, taking special care NOT to over-tighten.
6. As you turn the filter, it will automatically raise itself into position, moving about a quarter turn, or 90 degrees.
7. Dispense about 2 gallons of water, which runs about 5 minutes.

How often should you replace the GE XWF Replacement by Filters Fast®?

• Changing your GE XWF Replacement by Filters Fast® is a very quick and easy process that should be done once every six months.

What contaminants does the GE XWF Replacement by Filters Fast® reduce?

• The GE XWF Replacement by Filters Fast® is NSF 42 certified, which means that it reduces the following contaminants:

  • Chlorine Reduction
  • Taste and Odor Reduction

Specifications:

• Brand: Filters Fast®
• Part Number: PH21140
• Pack Size: 1
• Filter Life (Months): 6
• Filter Life (Gallons): 200
• Filter Media: Carbon Block
• Flow Rate: 0.5 gpm
• Operating Pressure: 20 - 100 psi
• Operating Temperature: 33 - 100 °F
• NSF Certification(s): 42

Customer Reviews:

Total Reviews: 1 | Average Rating: 5 / 5.0

Arthur Porep2023-12-02

Easy to purchase and easy to install.

Collected by Trustpilot.com